Impact of the sampling duration on the uncertainty of averaged velocity measurements with acoustic instruments     

Muste Marian  Jongmin Kim  Dongsu Kim 《水文研究》2021,35(4):e14125

Average velocity in streams is a key variable for the analysis and modelling of hydrological and hydraulic processes underpinning water resources science and practice. The present study evaluates the impact of the sampling duration on the quality of average velocity measurements acquired with contemporary instruments such as Acoustic Doppler Velocimeters (ADV) an Acoustic Doppler Current Profilers (ADCP). The evaluation combines considerations on turbulent flows and principles and configurations of acoustic instruments with practical experience in conducting customized analysis for uncertainty analysis purposes. The study sheds new insights on the spatial and temporal variability of the uncertainty in the measurement of average velocities due to variable sampling durations acting in isolation from other sources of uncertainties. Sampling durations of 90 and 150 s are found sufficient for ADV and ADCP, respectively, to obtain reliable average velocities in a flow affected only by natural turbulence and instrument noise. Larger sampling durations are needed for measurements in most of the natural streams exposed to additional sources of data variability.  相似文献   

盾构隧道下穿管道施工引起的管-土相互作用研究     

可文海  管凌霄  刘东海  邓建林  李科  徐长节 《岩土力学》2020,41(1):221-228

采用Loganathan公式研究了盾构隧道下穿管道施工引起的地下管道处土体竖向位移，利用考虑土中剪力传递的Pasternak模型模拟管-土相互作用，运用修正Vlasov模型中的迭代流程计算出Pasternak模型的关键参数——弹性系数k与剪切系数gs。将计算结果与已有文献结果及工程监测数据进行对比，深入分析了迭代求解k、gs值的Pasternak模型与传统模型的计算差异，并进一步研究了土中剪力、管道与隧道的夹角、土体弹性模量及隧道半径的变化对管-土相互作用的影响。研究结果表明：迭代求解的k、gs值能提升Pasternak模型的精确度；土中剪力对管道竖向位移计算值的影响可达15.3%；随着管道与隧道夹角的减小，管道的竖向位移增大、弯矩减小；土体弹性模量与隧道半径的增大均会增加管道的竖向位移和弯矩。  相似文献   

筋土界面特性宏细观分析试验仪器研制与应用     

易富  杜常博  王政宇  于犇 《煤田地质与勘探》2020,48(1):174-182

为了更全面地分析筋土界面相互作用特性，改制了一台可视加筋土界面特性宏细观分析的试验仪器，可开展不同土工合成材料与填料的直剪和拉拔试验；该仪器改进了试验箱的尺寸，可方便两种试验的对比分析，增加了图像摄录系统，可进行试验过程的细观分析。使用新研制仪器分别进行了土工合成材料（土工格栅和土工布）加筋尾矿砂的直剪和拉拔试验，试验结果表明:两种试验条件下，土工格栅与尾矿的界面参数（似黏聚力和似摩擦角）及似摩擦系数均比土工布与尾矿的界面参数和似摩擦系数大；直剪试验下筋材网孔的有无对筋-尾矿界面参数均有较大影响，拉拔试验下筋材网孔有无对筋-尾矿界面参数似黏聚力的影响较为显著，对似摩擦角的影响较小。随着宏观变量法向应力的增加，细观参数孔隙率减小，平均接触数增加，反映在宏观上的现象就是填料颗粒被压密，筋材需要克服的阻力增大。该试验仪器能够较好地分析筋土界面宏细观特性，获得关键技术指标以用于加筋结构的设计。   相似文献   

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献   

PS测井在机场隧道地基勘查中的应用          下载免费PDF全文

范伟顺 《山东国土资源》2018,34(1)

PS测井技术是地震勘探方法之一,也是一种简便、快速、准确的原位测试技术。该文介绍了单孔法PS测井的原理及其在铁路工程勘察中的应用,主要包括根据等效剪切波,进行建筑抗震场地类别划分,铁路工程抗震场地类别划分。根据岩土动力学参数,达到评价岩体质量和划分围岩类别目的,利用剪切波速法估算岩土的承载力基本值。通过青岛机场隧道场地的工程实例说明了PS测井技术在岩土工程勘察设计中的应用情况及应用效果。  相似文献   

Analytical study of ground motion caused by seismic wave propagation across faulted rock masses          下载免费PDF全文

J.C. Li  N.N. Li  S.B. Chai  H.B. Li 《国际地质力学数值与分析法杂志》2018,42(1):95-109

Studying seismic wave propagation across rock masses and the induced ground motion is an important topic, which receives considerable attention in design and construction of underground cavern/tunnel constructions and mining activities. The current study investigates wave propagation across a rock mass with one fault and the induced ground motion using a recursive approach. The rocks beside the fault are assumed as viscoelastic media with seismic quality factors, Q_p and Q_s. Two kinds of interactions between stress waves and a discontinuity and between stress waves and a free surface are analyzed, respectively. As the result of the wave superposition, the mathematical expressions for induced ground vibration are deduced. The proposed approach is then compared with the existing analysis for special cases. Finally, parametric studies are carried out, which includes the influences of fault stiffness, incident angle, and frequency of incident waves on the peak particle velocities of the ground motions.  相似文献   

塑性极限分析鱼雷锚锚尖贯入阻力     

瑜璐  杨庆  杨钢  张金利 《岩土力学》2020,41(6):1953-1962

鱼雷锚安装过程中,锚尖形状影响尖部贯入阻力进而影响贯入深度。基于塑性极限分析理论下限法分析不同锚尖长径比x的椭圆形锚尖的贯入阻力和贯入阻力系数,并考虑了贯入深度、锚-土界面摩擦对贯入阻力以及贯入阻力系数的影响。结果表明:(1)锚-土界面光滑时,锚尖贯入阻力系数随着锚尖长径比的增大而减小;锚-土界面粗糙时,锚尖贯入阻力系数随着锚尖长径比的增大而增大。(2)摩擦力对贯入阻力系数的影响随着ξ增大而增大。(3)随着埋置深度增加,贯入阻力系数受x影响最小时所对应的摩擦系数逐渐减小。(4)当锚-土界面摩擦系数ω 0.75时,工程中可选用ξ1的锚尖用以减小端部贯入阻力;当ω0.26时,ξ1的锚尖提供更小的端部贯入阻力。锚尖长径比ξ=0和ξ=1的下限解与前人研究的桩基和圆形结构的理论解较为一致,进一步验证了所提出的椭圆形锚尖下限法模型的可行性。  相似文献   

An approximate method for evaluating the shear band thickness in saturated soils     

X. B. Lu  Wang Shuyun  Wang Yihua  Peng Cui 《国际地质力学数值与分析法杂志》2004,28(15):1533-1541

A formula for the thickness of a shear band formed in saturated soils under a simple shear or a combined stress state has been proposed. It is shown that the shear band thickness is dependent on the pore pressure properties of the material and the dilatancy rate, but is independent of the details of the combined stress state. This is in accordance with some separate experimental observations. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry     

Jacques Desrues  Gioacchino Viggiani 《国际地质力学数值与分析法杂志》2004,28(4):279-321

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd  相似文献   

中国大陆科学钻探先导孔零偏VSP资料解释   总被引：3，自引：3，他引：0  

姜修道  朱光明  朱龙生  张文波  李桂花 《地球科学与环境学报》2004,26(1):55-60

用六级三分量检波器在中国大陆科学钻探先导孔中实施了零偏VSP测量.数据处理结果表明,中国大陆科学钻探孔区超高压变质岩石的地震波速度主要介于4500～7000m/s之间,显著高于一般的沉积岩地区,而且随深度变化不明显.声波测井速度系统地稍低于VSP层速度,可能是由于井壁处岩石的完整性受到破坏而造成的.地震波速度与岩石密度和岩性存在明确的对应关系,榴辉岩的密度和地震波速度均显著高于片麻岩类岩石;由榴辉岩退变生成的斜长角闪岩类岩石,其密度和地震波速度均呈现出较大的变化,主要与其退变质程度有关;超基性岩中的裂隙系统导致其密度和地震波速度大幅度下降.由于榴辉岩与其他岩石类型之间存在较大的波阻抗差异,因此用零偏VSP资料标定该区地震波的地质层位是有效的.关于地震波反射的原因,通过综合研究地震波(包括反射纵波、上行转换横波、井筒波)的特征、岩石速度和密度分布以及井径变化,认为主要是岩性分界面、韧性剪切带和断裂(带),但还有一些因素尚待进一步研究.  相似文献